Syringe Pump model: KL-702
Specification
| MODEL | KL-702 |
| Syringe Size |
10, 20, 30, 50/60 ml |
| Applicable Syringe |
Compatible with syringe of any standard |
| VTBI |
0.1-10000 ml ≥100 ml in 0.1 ml increments / ≥100 ml in 1 ml increments |
| Flow Rate |
Syringe 10 ml: 0.1-420 ml/h Syringe 20 ml: 0.1-650 ml/h Syringe 30 ml: 0.1-1000 ml/h Syringe 50/60 ml: 0.1-1600 ml/h ≥100 ml/h in 0.1 ml/h increments / ≥100 ml/h in 1 ml/h increments |
| Bolus Rate |
Syringe 10 ml: 200-420 ml/h Syringe 20 ml: 300-650 ml/h Syringe 30 ml: 500-1000 ml/h Syringe 50/60 ml: 800-1600 ml/h |
| Anti-Bolus |
Automatic |
| Accuracy | ±2% (mechanical accuracy ≤1%) |
| Infusion Mode |
Flow rate: ml/min, ml/h Time-based Body weight: mg/kg/min, mg/kg/h, ug/kg/min, ug/kg/h etc. |
| KVO Rate |
0.1-1 ml/h (in 0.1 ml/h increments) |
| Alarms |
Occlusion, near empty, end program, low battery, end battery, AC power off, motor malfunction, system malfunction, standby, pressure sensor error, syringe installation error, syringe drop off |
| Additional Features |
Real-time infused volume, automatic power switching, automatic syringe identification, mute key, purge, bolus, anti-bolus, system memory, history log, separate channel alarm, power saving mode |
| Drug Library |
Available |
| Occlusion Sensitivity |
High, medium, low |
| History Log | 50000 events |
| Power Supply, AC | 110-230 V, 50/60 Hz, 20 VA |
| Battery | 9.6±1.6 V, rechargeable |
| Battery Life | Power saving mode at 5 ml/h, 10 hours for single channel, 7 hours for double channel |
| Working Temperature | 5-40℃ |
| Relative Humidity | 20-90% |
| Atmospheric Pressure | 860-1060 hpa |
| Size | 330*125*225 mm |
| Weight | 4.5 kg |
ใบรับแจ้งรายการละเอียด เลขที่ 65-2-2-2-0015877
*อ่านคำเตือนในฉลากและเอกสารกำกับเครื่องมือแพทย์ก่อนใช้*
-----------------------------------------------------------------
Warning:
- Checking and confirming the normal operation of the pump periodically. Check the residual liquid and the syringe conditions. Don’t just rely on the pump alarm system.
- Avoid using the pump in presence of flammable gases and flammable anesthetic mixture with air, oxygen or nitrous oxide.
- The use of any mobile phone very close to the pump is not allowed since the high frequency noise during the conversation could cause malfunction of the pump.
- The use of the pump in MRI rooms such as high-pressure rooms or places where high electromagnetic radiation is generated is not allowed.
- During injection, the range of pump position shall not exceed ±65cm (based on the position of patients’ heart)
Precautions:
- Please use fingers to operate this pump. Any sharp tool may damage the panel of pump.
- If pump not used for a period of time (over one month), or the power of battery is very low, please recharge the battery by connecting to AC power supply. If the effective time reduce obviously after being charged, it show battery reach the end of life. Please contact authorized dealer to replace it.
- In case the pump does not work as the user’s manual and can’t find the reason. Please stop the operation and report the details of the problem
- In order to ensure the connection of injection line is stable, it is better to use mechanical syringe or spiral syringe
Contraindication: N/A
